I have recently had a new aluminium/glass greenhouse installed from a well known supplier.
I realise the amount of rain recently has been extreme but I'm quite surprised by the amount of water that gets in. This is concerning me with winter approaching as I would rather it be bone dry like my other greenhouse.
There are small gaps at the seams and edges where frames join and vented openings in the roof which up until now have not been a concern. Also water seeps in under the aluminium greenhouse base.
Should I live with a balance between dry and ventilation?
Are my expectations too high or is this normal? It looks like my only option is to get out the sealant gun which I did with my other greenhouse (brick, wood and twinwall polycarb).
Any advice or tips much welcome.
When you register on the Forum, your account requires to be approved by an admin before you will be able to post.
In order to try and keep the Forum a safe place for BCSS Members and other cacti and succulent enthusiasts of all ages, everyone who registers is checked. If you are a BCSS Member and include your membership number, this is easy, because we can just look you up in the database. If you are not a BCSS Member, then we rely on the data you provide. If we can't find any traces by a brief online search, your account will be placed "on hold" until you get in touch with us by email and ask for Forum account approval.
If you registered a while back and still haven't been approved, please drop an email to forum@bcss(etc) using the same email account you put in your Forum registration, giving your name, the Forum username you selected, and a sentence about your interest in cacti and succulents.
In order to try and keep the Forum a safe place for BCSS Members and other cacti and succulent enthusiasts of all ages, everyone who registers is checked. If you are a BCSS Member and include your membership number, this is easy, because we can just look you up in the database. If you are not a BCSS Member, then we rely on the data you provide. If we can't find any traces by a brief online search, your account will be placed "on hold" until you get in touch with us by email and ask for Forum account approval.
If you registered a while back and still haven't been approved, please drop an email to forum@bcss(etc) using the same email account you put in your Forum registration, giving your name, the Forum username you selected, and a sentence about your interest in cacti and succulents.
Greenhouse leaks
- EdMcKenna
- BCSS Member
- Posts: 74
- https://www.behance.net/kuchnie-warszawa
- Joined: 07 Aug 2020
- Branch: FIFE
- Country: Scotland
- Role within the BCSS: Member
-
- Registered Guest
- Posts: 368
- Joined: 23 Dec 2019
- Branch: NOTTINGHAM
- Country: United Kingdom
- Role within the BCSS: Member
Re: Greenhouse leaks
I have a similar problem with water seeping in under the structure and have seen small amounts of water getting in through gaps in the roof during very heavy rain. I did consider getting out the sealant gun and trying to stop these issues but haven't got around to it as of yet.
Growing in Nottingham for the past 4 years and recently found my way to a Nottingham branch meeting. A few plants on a windowsill has very quickly turned into a greenhouse full!
Attempting to grow a range of turbinicarpus, coryphantha, escobaria and several other cactus genera. Tylecodons, pelargoniums and conophytums keep me occupied in the winter and an ever expanding number of gasteria live under the bench.
Attempting to grow a range of turbinicarpus, coryphantha, escobaria and several other cactus genera. Tylecodons, pelargoniums and conophytums keep me occupied in the winter and an ever expanding number of gasteria live under the bench.
- EdMcKenna
- BCSS Member
- Posts: 74
- Joined: 07 Aug 2020
- Branch: FIFE
- Country: Scotland
- Role within the BCSS: Member
Re: Greenhouse leaks
I have tried drawing a bead of silicone around the outside of the base, obviously not enough. I'll probably do the same inside, my concern is the moisture and humidity over the winter. Hopefully heater and thermostat at 7 degrees combined with ventilation should keep my collection safe.
- el48tel
- BCSS Member
- Posts: 5903
- Joined: 04 Aug 2018
- Branch: LEEDS
- Country: UK
- Role within the BCSS: Member
- Location: Leeds
Re: Greenhouse leaks
I tried both ... inside and out .... unsuccessfully. I think you'd probably need to put the silicone down first and sit the frame on top of it.EdMcKenna wrote: ↑Mon Oct 30, 2023 11:44 pm I have tried drawing a bead of silicone around the outside of the base, obviously not enough. I'll probably do the same inside, my concern is the moisture and humidity over the winter. Hopefully heater and thermostat at 7 degrees combined with ventilation should keep my collection safe.
Endeavouring to grow Aylostera, Echinocereus, Echinopsis, Gymnocalycium, Matucana, Rebutia, and Sulcorebutia. Fallen out of love with Lithops and aggravated by Aeoniums.
Currently being wooed by Haworthia, attempting hybridisation, and enticed by Mesembs. Recently discovered gorgeous Gasteria.
Currently being wooed by Haworthia, attempting hybridisation, and enticed by Mesembs. Recently discovered gorgeous Gasteria.
-
- Registered Guest
- Posts: 330
- Joined: 28 Dec 2020
- Branch: None
- Country: uk
- Role within the BCSS: Member
Re: Greenhouse leaks
Are you using CT1? CT1 and similar products were recommended a few years ago on the forum. I've tried these out for various
water sealing jobs and so far been very impressed. A bit more expensive than a generic tube of sealant but works
better than the others I've tried. I like that it is quite sticky so if you apply even to damp or wet surfaces you can get
a good seal.
water sealing jobs and so far been very impressed. A bit more expensive than a generic tube of sealant but works
better than the others I've tried. I like that it is quite sticky so if you apply even to damp or wet surfaces you can get
a good seal.
- el48tel
- BCSS Member
- Posts: 5903
- Joined: 04 Aug 2018
- Branch: LEEDS
- Country: UK
- Role within the BCSS: Member
- Location: Leeds
Re: Greenhouse leaks
The spec escapes me since it's going back a couple of years. But was the one recommended by the local builder's merchant. On asking the GH installation guy .... squirting UNDER the framework rather than trying to run a seal ..... was the answer ..... but no guarantees!SimonT wrote: ↑Tue Oct 31, 2023 12:03 pm Are you using CT1? CT1 and similar products were recommended a few years ago on the forum. I've tried these out for various
water sealing jobs and so far been very impressed. A bit more expensive than a generic tube of sealant but works
better than the others I've tried. I like that it is quite sticky so if you apply even to damp or wet surfaces you can get
a good seal.
Endeavouring to grow Aylostera, Echinocereus, Echinopsis, Gymnocalycium, Matucana, Rebutia, and Sulcorebutia. Fallen out of love with Lithops and aggravated by Aeoniums.
Currently being wooed by Haworthia, attempting hybridisation, and enticed by Mesembs. Recently discovered gorgeous Gasteria.
Currently being wooed by Haworthia, attempting hybridisation, and enticed by Mesembs. Recently discovered gorgeous Gasteria.
- habanerocat
- BCSS Member
- Posts: 1070
- Joined: 02 Jun 2012
- Branch: DUBLIN
- Country: Mid-West Ireland
- Role within the BCSS: Member
- Location: Ireland
Re: Greenhouse leaks
It's hard to find out the specs on that but it's best to use a low modulus silicone on a greenhouse to cope with expansion and contraction of the glass/poly against the frame.SimonT wrote: ↑Tue Oct 31, 2023 12:03 pm Are you using CT1? CT1 and similar products were recommended a few years ago on the forum. I've tried these out for various
water sealing jobs and so far been very impressed. A bit more expensive than a generic tube of sealant but works
better than the others I've tried. I like that it is quite sticky so if you apply even to damp or wet surfaces you can get
a good seal.
-
- Registered Guest
- Posts: 330
- Joined: 28 Dec 2020
- Branch: None
- Country: uk
- Role within the BCSS: Member
Re: Greenhouse leaks
There are specialist products for sealing greenhouse glazing. These might be worth considering for that task.
But for sealing the base you need something that's going to bond to the frame and whatever it is sitting on.
Ct1 or similar would be good for this task- it bonds well to lots of different surfaces. If there is a small gap underneath in places then you can just fill these and then run a bead around.
But for sealing the base you need something that's going to bond to the frame and whatever it is sitting on.
Ct1 or similar would be good for this task- it bonds well to lots of different surfaces. If there is a small gap underneath in places then you can just fill these and then run a bead around.
-
- BCSS Member
- Posts: 1
- Joined: 24 Dec 2021
- Branch: None
- Country: United Kingdom
- Role within the BCSS: Member
- Location: Blackpool , Lancashire.
Re: Greenhouse leaks
I also have this problem so thanks all for the advice. Will be out with the silicone ( if it stops raining long enough )